Metal Strips Installation Guide

HOW TO APPLY METAL STRIP ON THE ENTRANCE?

1. Identify the tile or stone Joints on the flooring.
2. Mark the lines to be cut with the help of Scale or thread.
3. Blades should be fine enough to cut the floor precisely.
4. Cut the stone or Tile with 1.5 inches blade.
5. Embed the Metal Strip vertically in the groove.
6. Insert the strip at least 1 inch along the wall on both sides.
7. Fill the groove with white cement along with the existing color of the floor.
8. Clean the floor with a dry cloth
9. Next day, clean with wet cloth by putting some water on the cut area.

HOW TO APPLY METAL STRIP IN TOILET?

1. Identify the tile or stone Joints on the flooring.
2. Mark the lines to be cut with the help of Scale or thread.
3. Blades should be fine enough to cut the floor precisely.
4. Cut the stone or Tile with 1.5 inches blade.
5. Embed the Strip Vertically in the groove
6. Fill the groove with white cement along with the existing color of the floor.
7. Clean the floor with a dry cloth
8. Next day, clean with wet cloth by putting some water on the cut area.

HOW TO APPLY METAL STRIP AROUND SEPTIC TANK AND UGWT?

1. Identify the tile or stone Joints on the flooring.
2. Mark the lines to be cut with the help of Scale or thread.
3. Blades should be fine enough to cut the floor precisely.
4. Cut the stone or Tile by 1.5 inches blade.
5. Embed the Strip Vertically in the groove
6. Fill the groove with white cement along with the existing color of the floor.
7. Clean the floor with a dry cloth 8. Next day, clean with wet cloth by putting some water on the cut area.

THINGS TO KEEP IN MIND:

1. Metal Strip in wrong direction can cause Vastu defect in building.
2. Apply metal strips only after consulting with MahaVastu Experts.
3. Cut the floor or tiles with fine cutter on joints to retain the beauty of the floor.
4. Get the implementation done by a trained and skilled person.
5. Keep children to protect them from noise and dust.
6. Wear safety glasses if standing near the cutting area to protect your eyes from dust.
7. Ensure that the strip is embedded in the floor completely.