Change Polarity of Building with Springs

 HOW TO APPLY METAL SPRINGS IN THE FLOOR?
  1. Check the Polarity of the Springs by moving finger upwards along the spring.
  2. Mark the Spot to Install the spring.
  3. Ensure the point is not on Marma.
  4. Drill a hole of 3 inches wide with Drill Machine.
  5. Insert the Springs in that hole.
  6. Fill and Cover the hole with White cement.
  7. Let the spot dry and then clean the floor.
THINGS TO KEEP IN MIND:
  1. Use the colour and shape of Springs as per Zonal Element or Devta's Element.
  2. Its advised to use Metal Springs after consulting with MahaVastu Experts/Acharyas.
  3. Always check the Polarity of spring before Installing.

Reading next